The following criteria is being considered: By default, this is the case. Notably this driver uses the kernel scsi subsystem rather than implementing its own block device. Here is an example:. Tested with Linux 3.

Uploader: Fausho
Date Added: 12 October 2009
File Size: 54.63 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 58867
Price: Free* [*Free Regsitration Required]

Adaptec – Debian 8

You can of course manage several servers remotly from the same client. Enter the command arcconf64 rescan 1. This utility along with other crap can be downloaded here: Ubuntu users please enable it by typing:. LinuxRaidForAdmins last modified Same source requirements as the CLI tools.

Debian Packages

Details about individual drivers 3w-xxxx Hardware using this driver: Connector 0, Device 0 Vendor: Read information about your server with the command arcconf64 getconfig 1. Here is an example:. So here is current config: Volume 0 Block Size of member drives: Hosting sponsored by http: It also handles failure detection and report it by mail and syslog. DB3AA Status of logical device: If you plan to monitor your own server from a local X window server, install adaptec-storage-manager-gui.


If such information is easily available, monitoring tools can be written to detect and report failures. Enabling this feature can lead to major performance improvments in write mode. Linux kernel drivers 3.

This file does not contain the RAID status. Disabled Spinup limit internal drives: However, if you want to see in example array rebuild status you will have to run:.

Manage Hardware Raid with Built-In Adaptec Controller

Debian kernel freezes rejected IO to offline devices in case array becomes downgraded ie one disk failed. Driver name Name of the Linux kernel module. Not aware of any method of detecting the status for this RAID.

If you don’t have a active root account ie: Notably this driver uses the kernel scsi subsystem rather than implementing its own block device.

Adaptec supports Linux and provide an opensource kernel driver which has been part of Linux for ages. RAID status can be obtained via debisn mpt-status tool. There is a precompiled command line tool ipssend available from the vendor CD and IBM’s dumplog archive.


The process is performed in the background and can take several minutes. Enabled Global task priority: Anyway, it looks powerfull and you should have a look. At the end of aacraid section is the old debiam on tools available on Dell website, which may be useful for older distributions and controllers.

Please check with apt-cache policy arcconf the different version available and do an xdaptec pinning if latest doesn’t fit your adapter. Be sure to have waited enough time before wondering why it doesn’t work.